LV Switchgear

26 de junio de 2026Producto de baja tensión 950

Available Certifications CE / UL Availability depends on model and configuration.

Resumen

LV Switchgear, also known as UL 1558 Low Voltage Switchgear, is a key low-voltage power distribution product used for receiving, distributing, controlling, and protecting electrical energy in low-voltage systems. It is commonly installed on the low-voltage side of transformers and serves as the primary distribution equipment for downstream switchboards, panelboards, motor control systems, lighting panels, power equipment, HVAC systems, pumps, and other electrical loads.

Ventajas del producto

Designed for High-Reliability Low-Voltage DistributionLV Switchgear is suitable for primary low-voltage power distribution systems where reliability and safety are critical.

UL 1558 and ANSI C37.20.1 Oriented DesignThe switchgear can be designed according to UL 1558 and ANSI C37.

Withdrawable Air Circuit Breaker ConfigurationThe product can be equipped with UL1066 low-voltage air circuit breakers.

Strong Metal-Enclosed Frame StructureThe switchgear adopts a rigid metal-enclosed frame structure.

Especificaciones típicas

Standard Reference	UL 1558, ANSI C37.20.1
Circuit Breaker Type	UL1066 Air Circuit Breaker, ACB
Breaker Installation	Withdrawable type available
Rated Current	Project-based configuration; high-current busbar options available
Short-Circuit / Bus Withstand	Up to 100kA available according to project design
Instalación	Indoor electrical room, power distribution center, substation, industrial facility

Typical configuration only. Final ratings are confirmed against project requirements.

Aplicaciones

LV Switchgear / UL 1558 Low Voltage Switchgear is widely used in low-voltage power distribution systems that require high reliability, high current capacity, and safe operation. It is typically installed after a transformer and acts as the main low-voltage distribution center for electrical loads.

ÚLTIMO: NDB1LE-100SIGUIENTE: LV Switchboard

Recomendaciones relacionadas

NDM2E-800
2023年5月29日 986
1. Applicable Scope and Purpose of Circuit Breaker The NDM2E-800 series of electronic molded case circuit breakers (hereinafter referred to as circuit breakers) apply to infrequent switching of circuits with the AC 50Hz, the working voltage of A...
Ver detalles
NDQ3-125
2023年5月26日 1033
1. Applicable Scope and Purpose The NDQ3-125 P-grade ATSE are applicable for sites with the AC voltage below AC380V.AC400V.AC415V and the rated frequency of 50Hz. This product complies with the GB14048.1-2012 and GB/T14048.11-2016 standa...
Ver detalles
NDG3V-250-800 Isolating Switch
2023年5月26日 1222
Applications: The NDG3V-250~800 series switch-disconnectors are applicable to electric systems with a rated voltage up to DC 1500V and a rated current up to 800A. It can be used for infrequent close and open, it provides isolation and breaking ...
Ver detalles
NDB1-40 MCB miniature circuit breaker
2023年5月29日 989
1.Application Scope NDB1-40 dedicated to the low voltage power distribution system of industrial, buildings, energy, communications and infrastructure. The MCB can cut off phase and neutral lines at the same time, whereas the neutral line should...
Ver detalles