LV Switchgear

Produto de baixa tensão 940
Available Certifications CE / UL Availability depends on model and configuration.

Visão geral

LV Switchgear, also known as UL 1558 Low Voltage Switchgear, is a key low-voltage power distribution product used for receiving, distributing, controlling, and protecting electrical energy in low-voltage systems. It is commonly installed on the low-voltage side of transformers and serves as the primary distribution equipment for downstream switchboards, panelboards, motor control systems, lighting panels, power equipment, HVAC systems, pumps, and other electrical loads.

LV Switchgear

Vantagens do produto

Designed for High-Reliability Low-Voltage DistributionLV Switchgear is suitable for primary low-voltage power distribution systems where reliability and safety are critical.
UL 1558 and ANSI C37.20.1 Oriented DesignThe switchgear can be designed according to UL 1558 and ANSI C37.
Withdrawable Air Circuit Breaker ConfigurationThe product can be equipped with UL1066 low-voltage air circuit breakers.
Strong Metal-Enclosed Frame StructureThe switchgear adopts a rigid metal-enclosed frame structure.

Especificações típicas

Standard ReferenceUL 1558, ANSI C37.20.1
Circuit Breaker TypeUL1066 Air Circuit Breaker, ACB
Breaker InstallationWithdrawable type available
Rated CurrentProject-based configuration; high-current busbar options available
Short-Circuit / Bus WithstandUp to 100kA available according to project design
InstallationIndoor electrical room, power distribution center, substation, industrial facility

Typical configuration only. Final ratings are confirmed against project requirements.

Aplicações

LV Switchgear / UL 1558 Low Voltage Switchgear is widely used in low-voltage power distribution systems that require high reliability, high current capacity, and safe operation. It is typically installed after a transformer and acts as the main low-voltage distribution center for electrical loads.

ÚLTIMO: PRÓXIMO:

Recomendações relacionadas

  • SVM5H-400H/R MCCB de 1000 VCA

    1004

    Gemeral SVM5H series of moulded case circuit breaker is supplied with rated insulating voltage 1150V and used for circuit of A.C. 50Hz, rated operating voltage AC 1140V. (or below), rated operating current up to 630A for infrequent changing over a...

    Ver detalhes
  • NDM2-800

    949

    1. Applicable Scope and Purpose of Circuit Breaker The NDM2-800 molded case circuit breaker (hereinafter referred to as circuit breaker) applies to infrequent switching of circuits with the AC 50Hz, the working voltage of AC690V and working curr...

    Ver detalhes
  • NDB1-63 MCB miniature circuit breaker

    1241

    Application ●Short -circuit protection ●Over-load protection ●Isolation NDB1-63 dedicated to the low voltage power distribution system of industrial, buildings, energy communications and infrastructure. Specification: 1P+N:AC230/240V; 2P:AC400/...

    Ver detalhes
  • NDGR2-160 Isolating Switch

    919

    Applications: NDGR2-160 isolating switch fuse group applied to ac 50 hz, rated voltage of AC400V, AC690V, rated current 160 a low-voltage distribution network, or motor as infrequently connected, breaking circuit and circuit isolation...

    Ver detalhes
Expandir mais!

Lista de produtos de consultoria
Lista de produtos de consultoria Enviar um pedido de informação sobre os produtos acima