RCBO SVL1E-63

Specification:

Electrical Features
Mode	Electronic
Type	A
Rated Current In	16, 20, 25, 32, 40, 50, 63A
Poles	2P(1P+N), 4P(3P+N)
Rated Voltage Ue	2P 240V~, 4P 415V~
Insulation Voltage Ui	500V
Rated Frequency	50/60Hz
Rated Residual Operation Current (I△n)	30mA
Rated Residual Operating Current (I△dc)	6mA
Rated Breaking Capacity	10000A
Break Time Under I△n	≤0.1s
Rated Impulse Withstand Voltage (1.5/50) Uimp	4000V
Dielectric Test Voltage at ind.Freq. for 1min	2kV
Pollution Degree	2
Thermo-magnetic Release Characteristic	B, C
Electrical Life	4000 Cycles
Mechanical Life	10000 Cycles

Installation
Contact Position Indicator	Yes
Protection Degree	IP20
Reference Temperature for Setting of thermal element	30℃
Ambient Temperature (with daily average≤35℃)	-25℃~+40℃
Storage Temperature	-25℃~+70℃
Terminal Connection Type	Cable/Pin-type Busbar/U-type Busbar
Terminal Size top/bottom for Cable	25mm² 18~3AWG
Terminal Size top/bottom for Busbar	25mm² 18~3AWG
Tightening Torque	2.5Nm 22In-lbs
Mounting	On DIN Rail EN60715(35mm) by means of fast clip device
Connection	From top

Tripping Current Range:

Circuit Diagram Overall and Installation Dimension (mm)

Lagging Angle	I△n＞0.01A	I△n≤0.01A
0°	0.35I△n ≤ I△ ≤ 1.4I△n	0.35I△n ≤ I△ ≤ 2I△n
90°	0.25I△n ≤ I△ ≤ 1.4I△n	0.25I△n ≤ I△ ≤ 2I△n
135°	0.11I△n ≤ I△ ≤ 1.4I△n	0.11I△n ≤ I△ ≤ 2I△n

Alternative Current Sensitive	Pulsating Direct Current Sensitive	Surge Current Proof
B Class Tripping is ensured for sinusoidal AC residual currents pulsed DC residual current, alternating residual sinusoidal currents up to 1000Hz, pulsating direct residual currents and for smooth direct residual currents, whether applied suddenly or increasing slowly.	They react to AC and pulsating DC fault current which reach 0 or almost 0 within one time period of the mains frequency.	RCCB’s surge capacity. Not tripping at standardized 8/20 us surge-current waves acc.to VDE 0432 Part 2 with surge current values of up to 250A.