The AVR automatic voltage stabilizer continuously corrects supply-voltage variation to provide a steadier output for connected equipment. It is available in project-matched control arrangements for factories, commercial buildings and installations where voltage fluctuation can affect process reliability.
| Rated Capacity | 10–1000 kVA typical |
|---|---|
| System | Three phase |
| Nominal Voltage | 380 / 400 / 415 V typical |
| Input Range | Selected to site conditions |
| Frekans | 50 or 60 Hz |
| Control | Servo or static option |
Typical configuration only. Final ratings are confirmed against project requirements.
Recommended for production machinery, laboratories, office buildings, communication equipment, retail facilities and other loads exposed to unstable utility voltage. Regulation range and response requirements are confirmed for the actual load profile.
NDB3-30 is a compact hydraulic-magnetic circuit breaker for equipment, covering low-current AC and DC circuits. It provides overload and short-circuit protection with configurable delay curves and actuator options. Typical configuration only. Fin...
Ayrıntıları görüntüle
1. Applicable Scope and Purpose of Circuit Breaker The NDM2E-250 series of electronic molded case circuit breakers (hereinafter referred to as circuit breakers) apply to infrequent switching of circuits with the AC 50Hz, the working voltage of A...
Ayrıntıları görüntüle
Applications: The NDG3V-250~800 series switch-disconnectors are applicable to electric systems with a rated voltage up to DC 1500V and a rated current up to 800A. It can be used for infrequent close and open, it provides isolation and breaking ...
Ayrıntıları görüntüle
General SVM5H series of moulded case circuit breaker is supplied with rated insulating voltage 1150V and used for circuit of A.C. 50Hz, rated operating voltage AC 1140V. (or below), rated operating current up to 630A for infrequent changing over a...
Ayrıntıları görüntüle
Öne Çıkan Kategoriler
Ürün Sorgusu Gönder
24 saat içinde sizinle iletişime geçeceğiz