RCCB SVL1M-63

Specification:

Electrical Features
Mode	Electromagnetic
Type (wave form of the earth leakage sensed)	B
Rated Current In	25, 40, 63A
Poles	2P, 4P
Rated Voltage Ue	2P 240V~, 4P 415V~
Insulation Voltage Ui	500V
Rated Frequency	50/60Hz
Rated Residual Operation Current (I△n)	30mA
Rated Residual Operating Current (I△dc)	6mA
Rated Residual Making & Breaking Capacity (I△m)	500A (In≤40A), 10In (In＞40A)
Short-circuit Current Inc = I△c	10000A
SCPD Fuse
Break Time Under I△n	≤0.1s
Rated Impulse Withstand Voltage (1.5/50) Uimp	4000V
Dielectric Test Voltage at ind.Freq. for 1min	2.5kV
Electrical Life	2000 Cycles
Mechanical Life	4000 Cycles

Installation
Contact Position Indicator	Yes
Protection Degree	IP20
Ambient Temperature (with daily average≤35℃)	-25℃~+35℃
Storage Temperature	-25℃~+70℃
Terminal Connection Type	Cable/Pin-type Busbar/U-type Busbar
Terminal Size top/bottom for Cable	35mm² 18~3AWG
Terminal Size top/bottom for Busbar	35mm² 18~3AWG
Tightening Torque	2.5Nm 22In-lbs
Mounting	On DIN Rail EN60715(35mm) by means of fast clip device
Connection	Power Supply in Both Directions

Tripping Current Range:

Lagging Angle	I△n＞0.01A	I△n≤0.01A
0°	0.35I△n ≤ I△ ≤ 1.4I△n	0.35I△n ≤ I△ ≤ 2I△n
90°	0.25I△n ≤ I△ ≤ 1.4I△n	0.25I△n ≤ I△ ≤ 2I△n
135°	0.11I△n ≤ I△ ≤ 1.4I△n	0.11I△n ≤ I△ ≤ 2I△n

Alternative Current Sensitive	Pulsating Direct Current Sensitive	Surge Current Proof
B Class Tripping is ensured for sinusoidal AC residual currents pulsed DC residual current, alternating residual sinusoidal currents up to 1000Hz, pulsating direct residual currents and for smooth direct residual currents, whether applied suddenly or increasing slowly.	They react to AC and pulsating DC fault current which reach 0 or almost 0 within one time period of the mains frequency.	RCCB’s surge capacity. Not tripping at standardized 8/20 us surge-current waves acc.to VDE 0432 Part 2 with surge current values of up to 250A.

Overall and Installation Dimension (mm)

Circuit Diagram

NDM2-250
2023/05/29 941
1. Applicable Scope and Purpose of Circuit Breaker The NDM2-250 molded case circuit breaker (hereinafter referred to as circuit breaker) applies to infrequent switching of circuits with...
View details
NDQ3-630
2023/05/26 980
1. Applicable Scope and Purpose The NDQ3-630 P-grade ATSE are applicable for sites with the AC voltage below AC380V.AC400V.AC415V and the rated frequency of 50Hz. This product comp...
View details
NDB2-40 MCB miniature circuit breaker
2023/05/29 745
1.Application scope and purpose Short-circuit protection Over-load protection Control Isolation NDB2-40 dedicated to the low voltage power distribution system of industrial...
View details
SVM5H-250H 1000VAC MCCB
2023/11/24 969
General SVM5H series of moulded case circuit breaker is supplied with rated insulating voltage 1150V and used for circuit of A.C. 50Hz, rated operating voltage AC 1140V. (or below), rated o...
View details

PRODUCT CENTER